Install SSD on old PC – Clone Win 10 from HDD – Enable ACHI mode – Full guide

Άρθρο

Install SSD on old PC – Clone Windows 10 from HDD to SSD – Enable ACHI mode – Full guide

 

Install SSD on old PC – Clone Windows 10 from HDD to SSD – Enable ACHI mode

The ultimate step-by-step guide

  1. Get Acronis True Image (Recommended).
  2. Power off your PC. Change positions to the disks. Connect the SSD disk in the same SATA port that was the HDD disk. Connect the HDD disk in another SATA port.
  3. Get into your BIOS settings. Change BIOS settings to boot from USB. Save your settings before exit.
  4. Boot from Acronis True Image USB/CD
  5. Clone the HDD disk with normal settings. Does not matter if the size of the SSD disk is bigger or smaller. The important is that the size of the data on the HDD disk, must fit on the SSD disk.
  6. When the job is finish Power off your PC. Disconnect HDD disk for the first boot.
  7. Get into your BIOS settings. Change BIOS settings to boot from the new SSD. Save your settings before exit.
  8. Boot In Windows 10.
  9. While in Windows 10, press the Win+R keys to open Run, type regedit, and click/tap on OK to open Registry Editor. If prompted by UAC, click/tap on Yes.
  10. In the left pane of Registry Editor, browse to the key location below:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\iaStorAV\StartOverride
    In the right pane of the StartOverride key, double click/tap on the 0 DWORD to modify it.
    Type 0 (zero), and click/tap on OK.
  11. In the left pane of Registry Editor, browse to the key location below:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\iaStorV
    In the right pane of the iaStorV key, double click/tap on the Start DWORD to modify it.
    Type 0 (zero) for AHCI, and click/tap on OK.
  12. In the left pane of Registry Editor, browse to the key location below:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\iaStorV\StartOverride
    In the right pane of the StartOverride key, double click/tap on the 0 DWORD to modify it.
    Type 0 (zero), and click/tap on OK.
  13. In the left pane of Registry Editor, browse to the key location below.
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\storahci
    In the right pane of the storahci key, double click/tap on the Start DWORD to modify it.
    Type 0 (zero) for AHCI, and click/tap on OK.
  14. In the left pane of Registry Editor, browse to the key location below to see if you have the StartOverride here. If you don’t, then go to step 15 below:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\storahci\StartOverride
    If you do, then, in the right pane of the StartOverride key, double click/tap on the 0 DWORD to modify it.
    Type 0 (zero), and click/tap on OK.
  15. When finished, close Registry Editor.
  16. Boot your PC.
  17. Get into your BIOS settings. Change IDE mode to ACHI mode. Save your settings before exit.
    : These settings will vary per brand and model number of motherboard. Please read your motherboard manual for more specific details about how to change SATA settings for it.
  18. Windows 10 starts in Safe Mode. Disable Windows Safe Mode by using the guide on step 16.
  19. Boot your PC in normal mode.
  20. When Windows starts, it’ll automatically install AHCI drivers.
    If not, you have to manually install your drivers for IDE ATA/ATAPI SATA AHCI Controller throught Windows 10 Device Manager.
    : These drivers will vary per brand and model number of motherboard. Please read your motherboard manual for more specific details.
    : Updated WHQL Intel’s RST/RST(e) AHCI/RAID. You can download all the drivers on the page and let Windows 10 Device Manager to choose the proper driver for IDE ATA/ATAPI SATA AHCI Controller in manual mode.
  21. When finished boot your PC one last time.
  22. If you want yo boot from your old HDD you have to repeat steps 7-22.
  23. If you want to add AHCI Link Power Management to Power Options in Windows 10 follow this guide.

🇿🇦 z.a.bloe

Κοινοποιήστε: Twitter Facebook Google+ LinkedIn Email

Εκτυπώστε:

Μόνιμος σύνδεσμος: https://uni-arts.com/install-ssd-on-old-pc-clone-windows-10-from-hdd-to-ssd-enable-achi-mode-full-guide/

Σύντομο URL: https://uni-arts.com/?p=1021

Αφήστε μια απάντηση

Η ηλ. διεύθυνσή σας δεν δημοσιεύεται. Τα πεδία με τον (*) αστερίσκο είναι υποχρεωτικά.

*
Μπορείτε να κάνετε χρήση των παρακάτω στοιχείων και ιδιοτήτων HTML5: <a > <blockquote > <abbr > <del > <q > <strike> <strong> <cite> <code> <span> <em> <br> <b> <p> <i>
*
*